sábado, 29 de outubro de 2011
quinta-feira, 27 de outubro de 2011
Aula 7 - 26 Outubro de 2011
Alinhamento dos polígonos feitos em AutoCad na aula anterior.
Processo:
Command: audited
Unknown command "AUDITED". Press F1 for help.
Command: *Cancel*
Command: z
ZOOM
Specify corner of window, enter a scale factor (nX or nXP), or
[All/Center/Dynamic/Extents/Previous/Scale/Window/Object] <real time>: e
Command: la
LAYER
Command:
Command:
LAYER
Command: la
LAYER
Command: options
Command: l
LINE Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]:
Command: id
Specify point: X = 0.7370 Y = 0.4555 Z = 0.0000
Command: *Cancel*
Command: id
Specify point: X = 0.7370 Y = 0.4555 Z = 0.0000
Command:
Command: _.erase 1 found
Command: la
LAYER
Command: l
LINE Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]:
Command: units
Automatic save to C:\Users\Carla\appdata\local\temp\Poligonos_1_1_0041.sv$ ...
Command:
Command: move
Select objects: 1 found
Select objects:
Specify base point or [Displacement] <Displacement>: *Cancel*
Command: os
OSNAP
Command:
Command: move
Select objects: 1 found
Select objects:
Specify base point or [Displacement] <Displacement>: Specify second point or
<use first point as displacement>: 0.5
Command:
Command: strech
Unknown command "STRECH". Press F1 for help.
Command: stretch
1 found
Specify base point or [Displacement] <Displacement>:
Specify second point or <use first point as displacement>:
Command: _u STRETCH
Command: _u MOVE
Command: *Cancel*
Command: stretch
Select objects to stretch by crossing-window or crossing-polygon...
Select objects: 1 found
Select objects:
Specify base point or [Displacement] <Displacement>:
Specify second point or <use first point as displacement>: 0.5
Invalid point.
Specify second point or <use first point as displacement>: 0.5
Invalid point.
Specify second point or <use first point as displacement>: 0.5
Invalid point.
Specify second point or <use first point as displacement>: 0.5
Command: _u STRETCH
Command: move
Select objects: 1 found
Select objects:
Specify base point or [Displacement] <Displacement>: 0.5,0.5
Specify second point or <use first point as displacement>:
Command: _u MOVE
Command: move
Select objects: 1 found
Select objects:
Specify base point or [Displacement] <Displacement>: 0.5,0.5
Specify second point or <use first point as displacement>:
Command: _u MOVE
Command: move
Select objects: 1 found
Select objects:
Specify base point or [Displacement] <Displacement>: *Cancel*
Command: move
Select objects: 1 found
Select objects:
Specify base point or [Displacement] <Displacement>: Specify second point or
<use first point as displacement>:
Command: _u MOVE
Command: move
Select objects: 1 found
Select objects:
Specify base point or [Displacement] <Displacement>: Specify second point or
<use first point as displacement>: @0.5,0.5
Command: _u MOVE
Command: move
Select objects: 1 found
Select objects:
Specify base point or [Displacement] <Displacement>: Specify second point or
<use first point as displacement>: @0.5,0.5
Command: _u MOVE
Command:
Automatic save to C:\Users\Carla\appdata\local\temp\Poligonos_1_1_0041.sv$ ...
Command:
Command:
Command: *Cancel*
Command: l
LINE Specify first point: *Cancel*
Command: c
CIRCLE Specify center point for circle or [3P/2P/Ttr (tan tan radius)]: 3p
Specify first point on circle:
Specify second point on circle:
Specify third point on circle:
Command: move
Select objects: 1 found
Select objects:
Specify base point or [Displacement] <Displacement>: *Cancel*
Command: os
OSNAP
Command:
Command: move
Select objects: 1 found
Select objects:
Specify base point or [Displacement] <Displacement>: Specify second point or
<use first point as displacement>: 0.5,0.5
Command:
Command: _.erase 1 found
Command: m
MOVE
Select objects: 1 found
Select objects:
Specify base point or [Displacement] <Displacement>: Specify second point or
<use first point as displacement>: 0.5,0.5
Command: l
LINE Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]:
Command: l
LINE Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]: *Cancel*
Command:
Command: _.erase 1 found
Command:
Command: *Cancel*
Command: w
WBLOCK
Command: m
MOVE
Select objects: w
Specify first corner: Specify opposite corner: 6 found
1 was on a locked layer.
Select objects: r
Remove objects: 1 found, 1 removed, 4 total
Remove objects: 1 found, 1 removed, 3 total
Remove objects:
Specify base point or [Displacement] <Displacement>: Specify second point or
<use first point as displacement>: 0.5,0.5
Automatic save to C:\Users\Carla\appdata\local\temp\Poligonos_1_1_0041.sv$ ...
Command:
Command: m
MOVE
Select objects: 1 found
Select objects:
Specify base point or [Displacement] <Displacement>: 0.5,0.5
Specify second point or <use first point as displacement>: *Cancel*
Command: m
MOVE
Select objects: 1 found
Select objects:
Specify base point or [Displacement] <Displacement>: Specify second point or
<use first point as displacement>: @0.5,0.5
Command: _u MOVE
Command:
Command:
Command: _QSave Drawing saved in AutoCAD 2010 format.
Command:
Command: _.erase 1 found
Command:
Command: _.erase 1 found
Command: l
LINE Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]:
Command: m
MOVE
Select objects: 1 found
Select objects:
Specify base point or [Displacement] <Displacement>: Specify second point or
<use first point as displacement>: 0.5,0.5
Command:
Command: *Cancel*
Command:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: *Cancel*
Command: m
MOVE
Select objects: 1 found
Select objects:
Specify base point or [Displacement] <Displacement>: Specify second point or
<use first point as displacement>: 0.5,0.5
Command:
Command: _.erase 1 found
Command:
Command:
Command: _QSave
Command: z
ZOOM
Specify corner of window, enter a scale factor (nX or nXP), or
[All/Center/Dynamic/Extents/Previous/Scale/Window/Object] <real time>: e
Resultado final:
Processo:
Command: audited
Unknown command "AUDITED". Press F1 for help.
Command: *Cancel*
Command: z
ZOOM
Specify corner of window, enter a scale factor (nX or nXP), or
[All/Center/Dynamic/Extents/Previous/Scale/Window/Object] <real time>: e
Command: la
LAYER
Command:
Command:
LAYER
Command: la
LAYER
Command: options
Command: l
LINE Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]:
Command: id
Specify point: X = 0.7370 Y = 0.4555 Z = 0.0000
Command: *Cancel*
Command: id
Specify point: X = 0.7370 Y = 0.4555 Z = 0.0000
Command:
Command: _.erase 1 found
Command: la
LAYER
Command: l
LINE Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]:
Command: units
Automatic save to C:\Users\Carla\appdata\local\temp\Poligonos_1_1_0041.sv$ ...
Command:
Command: move
Select objects: 1 found
Select objects:
Specify base point or [Displacement] <Displacement>: *Cancel*
Command: os
OSNAP
Command:
Command: move
Select objects: 1 found
Select objects:
Specify base point or [Displacement] <Displacement>: Specify second point or
<use first point as displacement>: 0.5
Command:
Command: strech
Unknown command "STRECH". Press F1 for help.
Command: stretch
1 found
Specify base point or [Displacement] <Displacement>:
Specify second point or <use first point as displacement>:
Command: _u STRETCH
Command: _u MOVE
Command: *Cancel*
Command: stretch
Select objects to stretch by crossing-window or crossing-polygon...
Select objects: 1 found
Select objects:
Specify base point or [Displacement] <Displacement>:
Specify second point or <use first point as displacement>: 0.5
Invalid point.
Specify second point or <use first point as displacement>: 0.5
Invalid point.
Specify second point or <use first point as displacement>: 0.5
Invalid point.
Specify second point or <use first point as displacement>: 0.5
Command: _u STRETCH
Command: move
Select objects: 1 found
Select objects:
Specify base point or [Displacement] <Displacement>: 0.5,0.5
Specify second point or <use first point as displacement>:
Command: _u MOVE
Command: move
Select objects: 1 found
Select objects:
Specify base point or [Displacement] <Displacement>: 0.5,0.5
Specify second point or <use first point as displacement>:
Command: _u MOVE
Command: move
Select objects: 1 found
Select objects:
Specify base point or [Displacement] <Displacement>: *Cancel*
Command: move
Select objects: 1 found
Select objects:
Specify base point or [Displacement] <Displacement>: Specify second point or
<use first point as displacement>:
Command: _u MOVE
Command: move
Select objects: 1 found
Select objects:
Specify base point or [Displacement] <Displacement>: Specify second point or
<use first point as displacement>: @0.5,0.5
Command: _u MOVE
Command: move
Select objects: 1 found
Select objects:
Specify base point or [Displacement] <Displacement>: Specify second point or
<use first point as displacement>: @0.5,0.5
Command: _u MOVE
Command:
Automatic save to C:\Users\Carla\appdata\local\temp\Poligonos_1_1_0041.sv$ ...
Command:
Command:
Command: *Cancel*
Command: l
LINE Specify first point: *Cancel*
Command: c
CIRCLE Specify center point for circle or [3P/2P/Ttr (tan tan radius)]: 3p
Specify first point on circle:
Specify second point on circle:
Specify third point on circle:
Command: move
Select objects: 1 found
Select objects:
Specify base point or [Displacement] <Displacement>: *Cancel*
Command: os
OSNAP
Command:
Command: move
Select objects: 1 found
Select objects:
Specify base point or [Displacement] <Displacement>: Specify second point or
<use first point as displacement>: 0.5,0.5
Command:
Command: _.erase 1 found
Command: m
MOVE
Select objects: 1 found
Select objects:
Specify base point or [Displacement] <Displacement>: Specify second point or
<use first point as displacement>: 0.5,0.5
Command: l
LINE Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]:
Command: l
LINE Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]: *Cancel*
Command:
Command: _.erase 1 found
Command:
Command: *Cancel*
Command: w
WBLOCK
Command: m
MOVE
Select objects: w
Specify first corner: Specify opposite corner: 6 found
1 was on a locked layer.
Select objects: r
Remove objects: 1 found, 1 removed, 4 total
Remove objects: 1 found, 1 removed, 3 total
Remove objects:
Specify base point or [Displacement] <Displacement>: Specify second point or
<use first point as displacement>: 0.5,0.5
Automatic save to C:\Users\Carla\appdata\local\temp\Poligonos_1_1_0041.sv$ ...
Command:
Command: m
MOVE
Select objects: 1 found
Select objects:
Specify base point or [Displacement] <Displacement>: 0.5,0.5
Specify second point or <use first point as displacement>: *Cancel*
Command: m
MOVE
Select objects: 1 found
Select objects:
Specify base point or [Displacement] <Displacement>: Specify second point or
<use first point as displacement>: @0.5,0.5
Command: _u MOVE
Command:
Command:
Command: _QSave Drawing saved in AutoCAD 2010 format.
Command:
Command: _.erase 1 found
Command:
Command: _.erase 1 found
Command: l
LINE Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]:
Command: m
MOVE
Select objects: 1 found
Select objects:
Specify base point or [Displacement] <Displacement>: Specify second point or
<use first point as displacement>: 0.5,0.5
Command:
Command: *Cancel*
Command:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: *Cancel*
Command: m
MOVE
Select objects: 1 found
Select objects:
Specify base point or [Displacement] <Displacement>: Specify second point or
<use first point as displacement>: 0.5,0.5
Command:
Command: _.erase 1 found
Command:
Command:
Command: _QSave
Command: z
ZOOM
Specify corner of window, enter a scale factor (nX or nXP), or
[All/Center/Dynamic/Extents/Previous/Scale/Window/Object] <real time>: e
Resultado final:
terça-feira, 25 de outubro de 2011
Aula 6 - 24 de Outubro 2011
Introdução ao desenho vectorial - AUTOCAD.
Execução de 6 polígonos: quadrado - cor 1 (vermelho)
triângulo - cor 2 (amarelo)
círculo - cor 3 (verde)
pentágono - cor 4 (azul claro)
retângulo r2 - cor 5 (azul escuro)
retângulo aureo - cor 6 (magenta)
Execução de 6 polígonos: quadrado - cor 1 (vermelho)
triângulo - cor 2 (amarelo)
círculo - cor 3 (verde)
pentágono - cor 4 (azul claro)
retângulo r2 - cor 5 (azul escuro)
retângulo aureo - cor 6 (magenta)
Aula 5 - 19 de Outubro 2011
Continuação da aula anterior.
Esclarecimento de dúvidas na construção da página html em Photoshop.
Esclarecimento de dúvidas na construção da página html em Photoshop.
quarta-feira, 19 de outubro de 2011
Aula 4 - 17 de Outubro 2011
Utilização do PHOTOSHOP 6 como editor para construção da página HTML.
Resumo do processo de criação:
- Criação da página base :
File -> New -> 800x600 pixels resolução 72 inch/polegadas cor: RGB (ideal para publicações html)
- Integração da imagem:
Open -> (Selecção do ficheiro jpeg a inserir na página) -> (depois da imagem aberta) -> Image-> Image Size -> 225x300 pixels (Ao mudar um dos valores a proporção mantém-se)
- Adição de texto e atribuição de uma ligação a esse texto:
Na ferramenta T, procedemos à adição de texto;
Para alteração do aspecto ou cor do texto: Clicar em cima do layer respectivo 2 vezes e selecionar a opção LAYER STYLE e fazer as alterações pretendidas.
Para atribuir uma ligação a esse texto: Ferramenta SLICE TOOL -> selecção do espaço/texto sobre o qual se pretende atribuir uma hiperligação.
Esta ferramenta irá criar umas linhas guia e atribuir vários números de corte, entre os quais devemos carregar em cima da ÁREA AZUL de cada corte individualmente e onde irá surgir a opção SLICE OPTIONS.
Na caixa de diálogo que aparece, no campo URL devemos colocar o endereço de HTML que corresponde ao texto seleccionado -> OK.
Após este processo estar concluido para todas as hiperligações pretendidas fazer SAVE FOR WEB e SAVE do mesmo documento.
- Publicação da página:
-> Abrir o servidor (no meu caso FilleZilla) -> abrir a pasta correspondente à página inicial (public_...) -> transportar os ficheiros criados, incluindo a pasta com as imagens (criado por defeito).
OBSERVAÇÕES:
Para que a pág. web fique com a mesma cor de fundo que a pág. criada no Photoshop, devemos colocar o código décimal da cor pretendida, código este que pode ser verificado na ferramenta COLOR PICKER do Photoshop e alterada no código html da nossa página, substituindo a cor de defeito #FFFF pela pretendida.
Aula 3 - 12 de Outubro 2011
- Palestra sobre o Projecto de Investigação NAADIR, apresentado pela aluna Sara Garcia.
Este projecto trata-se de uma nova abordagem ao Desenho Arquitectónico integrando descrições computacionais. - http://naadir-research.blogspot.com/
- Esclarecimento de algumas questões relacionados com a publicação da Página Principal Inicial;
terça-feira, 11 de outubro de 2011
Aula 2 - 10 de Outubro de 2011
- Projeccão de vídeos de trabalhos elaborados por alunos de anos anteriores;
- Visualização de Páginas Iniciais de alunos de anos anteriores;
- Criação da Página Inicial (PI) através de HyperText Markup Language, que significa Linguagem de Marcação de Hipertexto) HTML;
- Publicação da informação na Internet recorrendo ao programa FileZilla;
- Chamada da informação num separador para visualização da nossa PI;
Aula 1 - 03 de Outubro 2011
Projecção de filmes com o objectivo de dar a conhecer no que se baseia a cadeira de Processos de Computação e, visualização de alguns trabalhos realizados por alunos de anos anteriores.
Subscrever:
Mensagens (Atom)